CONNECT EXISTING HART INSTRUMENTS TO YOUR PROFIBUS PA NETWORK
FINT T500 — HART Master to PROFIBUS PA Slave Gateway
Supplied by SUNDAR TECHNO SOLUTIONS, Bengaluru, India
Take a closer look at the FINT T500 in our 360° product video, showing its compact housing, terminals and DIN-rail mounting arrangement.
Many factories have reliable HART transmitters already installed. When upgrading the control network, replacing these instruments solely to obtain a different communication interface can add cost and engineering work.
The FINT T500 provides a way to bring their digital measurements into a PROFIBUS PA system.
WHAT IS THE FINT T500?
The T500 is an industrial gateway from Fieldbus International, Norway.
It reads supported information from HART instruments and presents measurement data to a PROFIBUS PA network.
Its two communication roles are:
• HART MASTER on the instrument side.
• PROFIBUS PA SLAVE on the control-network side.
These roles are important when selecting the gateway and planning the network.
WHAT CONNECTS TO THE HART SIDE?
Up to FOUR compatible HART slave instruments can connect to one T500.
Examples include HART-enabled:
Pressure transmitters
Temperature transmitters
Level transmitters
Flow transmitters
Measurement devices and analysers using supported HART commands
The instruments must be correctly configured for multidrop operation, with unique supported addresses. The T500 then polls them to obtain their measurements.
Both current-sourcing and current-sinking HART transmitters are supported, with wiring and power arrangements selected for the actual instruments.
WHAT CONNECTS TO THE PROFIBUS SIDE?
The T500 connects as a slave device on a PROFIBUS PA segment.
A typical arrangement consists of:
1. HART instruments connected to the T500.
2. The T500 connected to a powered PROFIBUS PA segment.
3. A suitable DP/PA segment coupler or link connecting that segment to the PROFIBUS DP network.
4. A PLC or DCS master receiving the process information.
The controller’s engineering configuration and device integration files must match the selected arrangement.
The T500’s fieldbus interface is PROFIBUS PA. A PLC’s PROFIBUS DP port or PROFINET Ethernet port cannot simply be wired directly to it.
HOW MANY DEVICES AND MEASUREMENTS?
One T500 supports up to FOUR HART instruments.
In the normal arrangement, it reads one Primary Variable from each instrument and represents the measurements through four Analog Input function blocks.
For example:
• Instrument 1: pressure measurement.
• Instrument 2: temperature measurement.
• Instrument 3: tank level.
• Instrument 4: flow measurement.
Alternatively, the gateway can be configured to read four dynamic variables from ONE suitable HART instrument. The available variables depend on the instrument itself.
Measurement status accompanies the process values, helping the host assess the quality of the information.
WHICH PLC OR DCS MASTERS CAN BE USED?
Selection depends on the control system’s communication hardware and software.
For systems from Siemens, ABB, Yokogawa, Honeywell or other manufacturers, check:
• Is a suitable PROFIBUS master interface installed?
• Which DP/PA coupler, link or PA interface is being used?
• Can the engineering system integrate the T500 device description?
• Which process variables and diagnostics are required?
A manufacturer’s name alone does not establish compatibility.
Class 1 masters handle cyclic process-data exchange. Supported DP-V1 services allow Class 2 engineering tools to access parameters.
Share the exact PLC/DCS, communication module and coupler models with STS for technical verification.
PRACTICAL APPLICATION EXAMPLE
Consider a process skid with four existing HART transmitters measuring pressure, temperature, level and flow.
The plant wants these measurements available in its PROFIBUS-based DCS.
A suitable T500 installation can read the HART measurements and make them available through the PA network, allowing the plant to retain compatible instruments while integrating their data into the control system.
This can be useful during plant modernisation, skid integration and instrumentation upgrades.
WHERE CAN IT BE USED?
Potential applications include:
Chemical and process manufacturing
Water and wastewater treatment
Power generation and utilities
Pharmaceutical utility systems
Food and beverage processing
Oil and gas process instrumentation
Measurement, detector and analyser integration
OEM instrumentation skids and retrofit projects
For hazardous-area projects, the installation location, barriers and applicable equipment approvals must be checked separately.
FEATURES THAT MATTER
• Compact DIN-rail mounting.
• Removable screw terminals.
• Automatic instrument discovery after correct HART setup.
• Separate 24 V input for powering suitable HART instruments.
• Measurement-status and communication-diagnostic information.
• Configurable alarm flagging and measurement filtering.
The published T500 information specifies HART Universal Command support. It does not provide full HART transmitter configuration through PROFIBUS.
WHY SUNDAR TECHNO SOLUTIONS?
Correct protocol selection starts with understanding both sides of the application.
STS works across industrial communication, protocol converters, industrial networking and embedded computing. Our wider portfolio includes industrial panel PCs, fanless computers, rugged systems and IIoT hardware.
For a T500 enquiry, please send:
• HART instrument makes and models.
• Number of instruments.
• Required measurements or variables.
• PLC/DCS and communication-module details.
• Existing DP/PA coupler or link details.
• A simple connection diagram, if available.
These details help us assess the proposed solution and coordinate the necessary technical clarification.
SUPPLY ACROSS INDIA
Based in Bengaluru, STS welcomes enquiries from Chennai, Hosur, Coimbatore, Hyderabad, Visakhapatnam, Kochi, Pune, Mumbai, Nashik, Ahmedabad, Vadodara, Surat, Delhi NCR, Kolkata, Bhubaneswar and other industrial locations across India.
CONTACT SUNDAR TECHNO SOLUTIONS
Mobile / WhatsApp: +91 9482081014
WhatsApp: https://wa.me/919482081014
Email: sales@sundartechno.com
Website: https://www.sundartechno.in
Technical articles: https://www.sundartechno.com
Ananth Nagar, Electronic City, Bengaluru – 560100, India.
Planning to integrate HART instruments into a PROFIBUS PA system? Contact STS with your instrument and controller details.
#SundarTechnoSolutions #STS #FINT #T500 #HART #PROFIBUS #PROFIBUSPA #HARTtoPROFIBUS #ProtocolConverter #IndustrialGateway #ProcessAutomation #IndustrialInstrumentation #DCS #PLC #PressureTransmitter #TemperatureTransmitter #LevelMeasurement #FlowMeasurement #PlantModernisation #SystemIntegration #WaterTreatment #PowerGeneration #IndustrialAutomationIndia #Bengaluru
FINT T500 supplier India, HART to PROFIBUS PA gateway, HART master PROFIBUS PA slave, four HART instrument gateway, HART transmitter integration, PROFIBUS PA converter Bengaluru, DCS instrument integration, process automation gateway India, DIN rail protocol converter, plant instrumentation retrofit, Sundar Techno Solutions.

Leave a Reply