STS DEMONSTRATES BIDIRECTIONAL MQTT–IIoT COMMUNICATION
Sundar Techno Solutions (STS), Bangalore, has successfully demonstrated a working bidirectional Industrial Internet of Things system for real-time sensor monitoring and cloud-to-field equipment control.
This practical test demonstrates two-way communication:
Field sensor data transmitted to a local dashboard and cloud platform
Cloud commands transmitted back to operate a physical electrical load
TEST SETUP
A Modbus RTU temperature and relative-humidity sensor was connected through RS-485 to the STS IIoT Gateway.
The gateway was powered using 30 VDC. Its Ethernet LAN interface—supporting industrial Ethernet communication such as Modbus TCP—was connected to the internet through a router.
The STS IIoT Gateway contains approximately 8 GB of internal storage and was loaded with:
A lightweight Ubuntu Linux operating system
Cockpit for browser-based system management and terminal access
Node-RED for data acquisition, processing, MQTT communication and dashboard development
This means the principal IIoT software was running inside the gateway itself. A Celeron-based STS Box PC with a standard monitor was used to access and display the Node-RED dashboard through a web browser.
LIVE TEMPERATURE AND HUMIDITY MONITORING
The Node-RED dashboard displayed:
Live temperature gauge
Live relative-humidity gauge
Temperature trend graph
Humidity trend graph
Sensor and gateway communication status
Real-time spikes and variations
As a simple physical response test, warm and humid breath was applied near the sensing element.
The temperature increased from approximately 29.8°C to 31.5°C, and the resulting spike was immediately visible on the live dashboard.
Relative humidity also increased sharply because exhaled air contains more moisture. This change was captured by the Modbus RTU sensor, processed by the STS gateway and displayed on the dashboard.
The monitoring-data path was:
Modbus RTU T/RH Sensor
STS IIoT Gateway
Node-RED
MQTT
Adafruit IO Cloud
CLOUD-TO-FIELD REMOTE CONTROL
The demonstration also proved communication in the reverse direction.
An ON/OFF software switch was created on the Adafruit IO cloud dashboard. Operating this switch transmitted an MQTT command through the internet to the STS IIoT Gateway.
A USB relay board was connected to the gateway. The relay board acted as the electrical interface for switching the external circuit.
A programmable 24 VDC power supply and indicator lamp were wired through the relay’s NO, NC and COM contacts. When the cloud command was received, the USB relay operated and switched the 24 VDC lamp ON or OFF.
The control path was:
Adafruit IO Cloud Switch
MQTT Command
Router
STS IIoT Gateway
USB Relay
24 VDC Lamp
Therefore, this was not merely a dashboard or software simulation. A cloud command successfully operated a real physical electrical load.
A FUNDAMENTAL BUILDING BLOCK OF INDUSTRY 4.0
MQTT-based bidirectional communication is one of the important enabling technologies of Industry 4.0.
It allows sensors, machines, gateways, edge computers, dashboards and cloud platforms to exchange operational data and control commands efficiently.
The same architecture can be customised for:
Temperature and humidity monitoring
Cold rooms and cold-chain facilities
Warehouses and pharmaceutical storage
HVAC and cleanroom monitoring
Server rooms and data centres
Energy-meter monitoring
Pump, fan and lighting control
Water-treatment systems
Machine-status monitoring
Alarm notification and acknowledgement
Remote relay, contactor and valve control
Predictive-maintenance data collection
Industrial dashboards and reports
Smart factories and connected utilities
Adafruit IO was used for this successful proof of concept. Depending on the customer’s application and security requirements, STS can help configure similar solutions for:
Microsoft Azure IoT
Amazon Web Services—AWS IoT
Private or customer-hosted MQTT brokers
Local edge servers
Other MQTT-compatible cloud platforms
For production deployment, STS can also help incorporate TLS encryption, authentication, certificates, local buffering, store-and-forward communication, event logging, alarm management and dashboard customisation.
Critical industrial equipment should always be controlled through suitable PLC logic, electrical protection, safety interlocks and authorised command validation. The lamp shown in this video is a safe demonstration load.
STS IIoT CAPABILITIES
This working demonstration confirms STS capability in integrating:
Modbus RTU sensors
Modbus TCP and industrial Ethernet
MQTT bidirectional communication
Ubuntu Linux-based IIoT gateways
Cockpit management and terminal access
Node-RED programming and dashboards
Industrial Box PCs
Cloud data publishing
Cloud-to-field control
USB relay interfacing
Remote monitoring and actuation
Sundar Techno Solutions can help industries connect existing sensors and equipment to modern edge, dashboard and cloud platforms—supporting a practical and gradual transition towards Industry 4.0.
For IIoT gateways, industrial Box PCs, Modbus integration, MQTT connectivity, Node-RED dashboards and customised remote-monitoring solutions, contact:
Sundar Techno Solutions
Bangalore, India
Email: [sales@sundartechno.com] (mailto:sales@sundartechno.com)
WhatsApp/Mobile: +91 94820 81014
Industrial IIoT gateway India, MQTT gateway Bangalore, bidirectional MQTT communication, Modbus RTU to MQTT gateway, Modbus TCP gateway, Ubuntu industrial IoT gateway, Node-RED industrial dashboard, temperature and humidity monitoring system, cloud-to-field control, remote equipment monitoring, USB relay control, Adafruit IO integration, Microsoft Azure IoT integration, AWS IoT integration, industrial edge computing, Industry 4.0 solutions India, STS IIoT Gateway, industrial Box PC, cloud-connected sensor gateway and industrial remote-control system.
#SundarTechnoSolutions #STS #IIoT #IndustrialIoT #MQTT #BidirectionalCommunication #IoTGateway #ModbusRTU #ModbusTCP #NodeRED #UbuntuLinux #EdgeComputing #Industry40 #IndustrialAutomation #RemoteMonitoring #RemoteControl #CloudConnectivity #AdafruitIO #AzureIoT #AWSIoT #TemperatureMonitoring #HumidityMonitoring #IndustrialDashboard #IndustrialBoxPC #SmartFactory #DigitalTransformation #Bangalore #India

Leave a Reply